Token Ring Cable Assemblies
We manufacture and market a complete line of Token Ring cable assemblies and patch cords: DB9 Male to IBM Data Connector RJ45(8-PIN) to IBM Data Connector RJ45(6-PIN) to IBM Data
Connector RJ45(4-PIN) to IBM Data Connector IBM Data Connector to IBM Data Connctor Media Fileters, etc... Both Standard and Custom lengths are available.
Fundamentals of Token Ring
Networking with Token Ring is a sophisticated LAN technology that is largely used by IBM and is defined by the IEEE 802.5 standard.
Token Ring uses a star-wired topology in which all workstations connect to a central Multi station Access Unit (MAU). This makes moving , changing, and adding equipment quick and easy.
Token Ring is fault-tolerant. If, for example, the cable to one of your network PCs is damaged or cut, the MAU automatically bypasses that port. Because the logical ring stays intact, your network stays up.
Token Ring is easy to connect to a mainframe. You can plug your network directly into an IBM AS400 or 3172 controller. (Added workstation software or a gateway may be necessary.)
Token Ring support high speeds up to 16 Mbps. And you can connect up to 72 devices using low-cost unshielded twisted pair cable (Category 3, 4, 5) or up to 260 devices using shielded twisted-pair cable.
These cables are ETL certified to the latest IBM speculation and meet the requirements of the most recent NEC and U.L codes. When you purchase our cables you know that it meets the demands of
your computer manufacturer and building inspector.
|